Festo IFB05-03 Manual page 14

Contents and general instructions
Controller
manufacturer
Festo
ABB
Klöckner−Moeller
Fig. 0/5: Automation systems/field bus protocols which can be connected
XII
The valve terminals can be connected to the controllers of
various manufacturers. This manual deals with the configur
ation of the PLC and the addressing of the terminals for the
following control systems:
Controller (PLC)
FPC 405
SF−202 types
02...05
SF3 types
02...05
ABB Procontic
CS31 (connected
directly to the cen
tral unit)
ABB Procontic T200
SUCOS PS 30 series
e. g.
PS 416
PS 4−201
Please note
ABB
The address range of 64 I/Os can be used as from soft
ware version 1.3 (SW 23.01.95 or later).
Klöckner−Moeller
The protocol for use on the SUCOnet K can be used as
from software version 1.4 (SW 21.03.96 or later).
See type plate of valve terminal
field bus module
E.CFA
integrated
integrated
Central unit 07KR91
Central unit 07KR31
Central unit 07KT92
Central unit 07KT93
Coupler 07CS61
Serial bus interface
integrated
integrated
Festo P.BE−VIFB5−03−EN en 0503e
Field bus
Festo field bus
ABB
CS31 system bus
SucoNet K