Festo IFB05-03 Manual page 66

4. Commissioning
4−4
The table below shows the number of I/Os required per mod
ule for configuration.
Type of module
MIDI/MAXI manifold (type 03)
Single solenoid sub−base
Double solenoid sub−base
ISO manifold (type 04−B)
Single solenoid sub−base
Double solenoid sub−base
4−output module (4 digital outputs)
4−input module (4 digital inputs)
8−input module (8 digital inputs)
16−input module (16 digital inputs)
Multi I/O module
**)
Status bits
*) The I/Os are assigned automatically within the valve terminal,
irrespective of whether an input/output is actually used.
**) The status bits are assigned automatically within the terminal,
as soon as there are input modules.
Fig. 4/1: Number of assigned I/Os per module
Copy the following table for further calculations.
Number of I/Os
*)
assigned
2A
4A
1A
2A
4A
4E
8E
16E
12E + 8A
4E
Festo P.BE−VIFB5−03−EN en 0503e