Lattice Semiconductor LatticeECP2M PCI Express x4 User Manual page 7

Lattice Semiconductor
4. Press the SCAN button located in the toolbar. The LatticeECP2M device should be automatically detected.
5. Double-click the device to open the device information dialog. In the device information dialog, click the
Browse button located under Data File . Locate the desired bitstream file (.bit). Click OK to both dialog boxes.
6. Click the green GO button. This will begin the download process into the device. Upon successful download,
the device will be operational.
LatticeECP2M PCI Express x4
Evaluation Board User's Guide
7