Submenu "Read Cal.": Reading The Calibration Data - JUMO 202710/30 Operating Manual

6 Device settings
Parameter "dAtE": setting the date

6.4.3 Submenu "rEAd CAL.": reading the calibration data

32
Use the and
Menu/parameter
Press the key to save the setting and move to the next parameter or
press the key to save the setting and move to the next submenu of the
setting menu or
press the key to save the setting, quit the device settings, and return to
measurement mode.
The reading of the calibration data is described separately, see chapter 8.1.2
"Reading the calibration data ("rEAd CAL")", page 36.
keys to set the date:
Setting option Meaning
DD:MM Days (DD) and months (MM)