Table of Contents
Advertisement
MAKE SURE THE MACHINE HAS BEEN TURNED OFF AND UNPLUGGED FROM THE POWER SOURCE BEFORE PERFORM-
ING ANY MAINTENANCE OR ADJUSTMENTS.
LUBRICATION
Periodically lubricate all sliding or moving parts in-
cluding the column, rack and the quill shown (use any
all purpose grease, available at any hardware store).
Note: Bearings in the quill and the V-belt pulleys are
sealed, permanently lubricated and should require no fur-
ther maintenance.
RECOMMENDED OPTIONAL ACCESSORIES
22
Item #70-025
25 PIECE DRUM SAND-
ING KIT
Turn your drill press into a
mini drum sander. 5 dif-
ferent sized drums: 1/2",
3/4", 1", 1-1/2" & 2" plus 2
sets of 80 grit and 2 sets of
120 grit, sanding sleeves
for each.
Item #70-105
9" AUGER DRILL BIT SET
Heavy duty carbon steel.
Heattreatedand precision
sharpened for quick, ac-
curate and effortless cuts.
Includes 6 bits -sizes: 1/4",
5/16", 3/8", 1/2",5/8", 3/4"
with 3/8" shank, in a con-
venient carrying case.
Item #70-130
9" VISE-CLAMP
Adjustable lock-in clamp-
ing pressure and 360
degree rotation; a must
for all safety conscious
woodworkers.
Includes
two 1/2" t-bolts to mount
to any drill table with
9/16" (or wider)mounting
holes.
Item #70-030
ABRASIVE SLEEVES
10 piece replacement
abrasive sleeve set for
70-025. Includes 5 (one
of each size) 80 & 120 grit
sanding sleeves.
Item #95-140 / 95-150 / 95160
DRILL PRESS VISES
Hold down slots along
both sides. High tensile
iron casting construction
for maximum durability.
One-piece cast-iron axial
sleeve and movable jaws.
Fast action, "Acme" type
95-140 (4") / 95-150
screw threads.
(5") / 95-160 (6")
Item #70-125
DRILL PRESS TOOL TRAY
Can be installed on most
drill press columns. Made
with a metal swivel rod.
Hide quick links:
Advertisement
Table of Contents
