Pivoting The Table (Model 75-155 & 75-165 Only); Adjusting Table Height - General International 75-155 Setup & Operation Manual

MAKE SURE THE MACHINE HAS BEEN TURNED OFF AND UNPLUGGED FROM THE POWER SOURCE BEFORE PERFORM-
ING ANY MAINTENANCE OR ADJUSTMENTS.
TABLE SWING ADJUSTMENT
1.
Loosen the column lock handle as shown.
PIVOTING THE TABLE (MODEL 75-155 & 75-165 ONLY)
1. Loosen the pivot lock handle as shown.

ADJUSTING TABLE HEIGHT

1. Loosen the column lock handle as shown.
18
2.
Swing the table arm bracket and the table to the
desired position, then retighten the column lock
handle.
Note: When working with taller work pieces swing the ta-
ble 180° out of the way and use the base as a table.
2. Turn the table to the desired position, and then re-
tighten the pivot lock handle.
2. Turn the crank handle as shown until the table is at
the desired height, then retighten the column lock
handle.