Table of Contents
Advertisement
BEFORE ASSEMBLING, MAKE SURE THAT THE SWITCH IS IN THE "OFF" POSITION AND THAT THE POWER CORD IS
UNPLUGGED. DO NOT PLUG IN OR TURN ON THE MACHINE UNTIL YOU HAVE COMPLETED THE ASSEMBLY AND
INSTALLATION STEPS DESCRIBED IN THIS SECTION OF THE MANUAL.
INSTALLING THE HEAD STOCK ON THE COLUMN (CONTINUED)
3.
Center the head stock with the column and the
table.
INSTALLING THE TABLE (75-155/165 ONLY)
1.
Make sure that arbor C is to the right and the table
bracket is centered on the column. Turn the brack-
et if needed as shown.
D
3.
Tighten bolt D hand tight for now.
A
4.
C
2.
4.
Secure the head stock to the column by tighten-
ing screws A & B using a 5 mm Allen key.
Hold the arm against the bracket aligning the
mounting holes as shown.
Turn the arm counterclockwise until the zero point
of the table bracket and the arm are aligned as
shown E.
B
E
11
Hide quick links:
Advertisement
Table of Contents
