General International 75-155 Setup & Operation Manual page 2

8360 Champ-d'Eau, Montreal (Quebec) Canada H1P 1Y3
Telephone (514) 326-1161 • Fax (514) 326-5555 • www.general.ca
THANK YOU
or 75-510 drill press. This
and if properly used and maintained, will provide you with years of reliable service. For your
safety, as well as to ensure optimum performance and trouble-free operation, and to get
the most from your investment, please take the time to read this manual before assembling,
installing and operating the unit.
The manual's purpose is to familiarize you with the safe operation, basic function, and
features of this drill press as well as the set-up, maintenance and identification of its parts and
components. This manual is not intended as a substitute for formal
instruction, nor to offer the user instruction in the craft of woodworking/metalworking. If you
are not sure about the safety of performing a certain operation or procedure, do not proceed
until you can confirm, from knowledgeable and qualified sources, that it is safe to do so.
Once you've read through these instructions, keep this manual handy for future reference.
DISCLAIMER:
The information
in this manual pertain to the unit as it was supplied
from the factory at the time of printing. Because we
are committed to making constant improvements,
General® International reserves the right to make
changes to components, parts or features of this
unit as deemed necessary, without prior notice and
without obligation to install any such changes on
previously delivered units. Reasonable care is taken
at the factory to ensure that the specifications and
information in this manual corresponds with that of the
GENERAL® INTERNATIONAL
for choosing this General® International model
drill press has been carefully tested and inspected before shipment
and specifications
woodworking/metalworking
unit with which it was supplied. However, special orders
and "after factory" modifications may render some
or all information in this manual inapplicable to your
machine. Further, as several generations of this model
of drill press and several versions of this manual may
be in circulation, if you own an earlier or later version of
this unit, this manual may not depict your unit exactly. If
you have any doubts or questions contact your retailer
or our support line with the model and serial number of
your unit for clarification.
75-155, 75-165