Service; Replaceable Parts - Keysight Technologies 16197A Operation And Service Manual

Keysight 16197A Bottom Electrode SMD Test Fixture
Operation and Service Manual
6

Service

This chapter describes the replaceable parts of the fixture, and the method for
replacing parts.

Replaceable Parts

The support parts for RoHS and non-RoHS compliance 16197A Bottom
Electrode SMD Test Fixture with the exploded views and tables shown below.
Due to limited availability of RoHS compliance station and technical difficulties
in RoHS soldering, only parts and support level that do not require RoHS
soldering are supported. Replace all defective parts with RoHS compliance
part number. Do not disassemble each unit into smaller components than
shown in these exploded views. If a defective part to be replaced is part of a
component that cannot be disassembled, place an order for the entire
component. Defective parts or components may be sent to Keysight
Technologies local sales/service office for repair.
Perform
time a part is replaced.
Serial Number for Non-RoHS 16197A:
JP1KH00001 – JP1KH99999/MY43100001 – MY43201091/
SG43100001 – SG43201091
Serial Number for RoHS 16197A:
MY43201092 and above/SG43201092 and above
"Operation Check" in 16197A Operation and Service Manual each
61