Alarm messages
Far end client signal failure
...................................................................................................................................................................................................................................
Alarm identifier
Information
Alarm category
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Local indications
Cause
Actions
...................................................................................................................................................................................................................................
1-58
EMACcRCF
In Link Pass Through mode, a GFP Client Signal Fail (CSF) indication has
been received on the WAN port. At the remote ingress LAN port, the GFP CSF
indication has been inserted as a consequent action due to a failure of the
incoming client signal.
Transmission
ethPS
Prompt
Reported
-
Fault in the LAN input signal at the remote end resulting in loss of signal or
loss of character synchronization.
Repair the upstream signal interface.
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007