Alarm messages
STM-1 interface extension board removed
...................................................................................................................................................................................................................................
Alarm identifier
Information
Alarm category
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Local indications
Cause
Actions
...................................................................................................................................................................................................................................
1-168
STM1XcUNI
STM-1 interface extension board is missing
Equipment
equipment
Prompt
Reported
The red "Fault" LED is lit.
Although the 1643 AM/ 1643 AMS is provisioned to be equipped with an
STM-1 interface extension board, no STM-1 interface extension board is
present.
Install an STM-1 interface extension board, or change the provisioning.
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007