Memory Transmission - Sharp UX-CD600 Operation Manual

Sending a Fax From Memory
5
Repeat Steps 3 and 4 for each of the other destinations to which you
wish to send the fax (maximum of 20).
•
To check your selected destinations, press
delete a destination, scroll to the destination and then press
6
When you are ready to begin transmission, press
•
A Transaction Report is automatically printed out after Broadcasting is
completed. Check the "Note" column of the report to see if any of the
destinations are marked "Busy" or have a communication error code. If so,
send the document to those destinations again.

Memory transmission

You can also send a fax through memory when sending to a single
destination. This is convenient when sending to destinations where the line is
often busy, as it saves you from waiting to pick up the original document and
frees the feeder for other operations.
To send a fax through memory, load the document, press
then dial using one of the following methods:
♦
Press the number keys to enter the fax number and then press
START/MEMORY
♦
Press
START/MEMORY
♦
Press
96
.
repeatedly to select an auto-dial number and press
.
once to select the last number dialed and press
to scroll through them. To
STOP
START/MEMORY
.
START/MEMORY
START/MEMORY
.
, and
.