Optional Answering System Settings - Sharp UX-CD600 Operation Manual

Optional Answering System Settings

Optional Answering System Settings
Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you in
the answering system. The answering system is set at the factory to allow
each caller a maximum of 4 minutes to leave a message. If desired, you can
change this setting to 15, 30, or 60 seconds.
1
FUNCTION
Press
2
Press
3
Press
4
Press a number from 1 to 4 to select the desired ICM recording time.
: 15 seconds
: 60 seconds
STOP
5
Press
Fax reception on TAD failure
If the memory for recording incoming messages becomes full while you are
out, the answering system will no longer be able to record messages. The ON
TAD FAILURE setting is used to select whether or not the machine will switch
to automatic fax reception when this happens:
♦
Automatic fax reception YES: The machine will receive faxes automatically.
With this setting, you can still use the remote commands to listen to your
messages and then erase them (see Remote Operations on page 76).
70
once and
once.
once.
: 30 seconds
: 4 minutes
The display briefly shows
your selection, then:
to return to the date and time display.
once.
Display:
T.A.D. SETTING
RECORDING TIME
RECORDING TIME
1=15 SECONDS
REMOTE CODE