Sharp UX-CD600 Operation Manual page 48

Using Auto Attendant Mode
START/MEMORY
3
Press
record the message.
•
The greeting can be up to 60 seconds long. While recording, the display will
show the time left to record.
4
When finished, press
Selecting Auto Attendant mode
To select Auto Attendant mode,
press
appears in the display.
Note: When a call comes in on an open line, Auto Attendant mode will not
operate in the situations below. Instead, all cordless handsets (and the
machine if not being used for a phone call or fax) will ring normally.
♦
The machine's handset or speakerphone is in use, or a fax is being sent or
received.
♦
An intercom call is taking place, or a cordless handset is accessing the
machine to listen to messages or use the common auto-dial book.
♦
A copy is being made or a list is being printed.
46
and speak facing "MIC" on the operation panel to
STOP
RESOLUTION/
RECEPTION MODE
until
RESOLUTION/
RECEPTION MODE
.
JAN-02 10:30