Sharp UX-CD600 Operation Manual page 62

Sharp communication center operation manual ux-cd600
Hide thumbs Also See for UX-CD600:
Table of Contents

Advertisement

Making Phone Calls at the Machine
Using an auto-dial number
If the number that you wish to dial has been stored in the Common book in the
machine (see page 88), you can dial it automatically.
1
Press
display (if no name was stored, the number will appear).
2
Lift the handset or press
If "WHICH LINE?" appears in the display, press
to select line 2.
The number is automatically dialed.
Redial
You can automatically redial the last number dialed on the machine.
Note: The machine and the cordless handsets each retain their own separate
redial numbers.
1
Press
number dialed. Make sure the number that appears is the number you
wish to dial.
2
Lift the handset or press
If "WHICH LINE?" appears in the display, press
to select line 2.
The number is automatically dialed.
60
(or
) until the name of the other party appears in the
SPEAKER
once. <REDIAL> appears in the display, followed by the last
SPEAKER
.
.
to select line 1 or
to select line 1 or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd600 - b/w - fax

Table of Contents