Operating The Answering System; Number Of Rings In Tad Mode - Sharp UX-CD600 Operation Manual

Operating the Answering System

Activating the answering system
To turn on the answering system so that callers can leave messages, press
RESOLUTION/
RECEPTION MODE
until
♦
It will not be possible to set the reception mode to TAD mode (
general outgoing message has not been recorded.
Note: In TAD mode, the machine will automatically switch to fax reception if it
detects 6 seconds of silence after answering a call. For this reason, if a caller
pauses for this length of time while leaving a message, they will be cut off.

Number of rings in TAD mode

When the machine is set to TAD mode, it will answer incoming calls after two
rings if it has received at least one message (in any of the boxes), or after four
rings if it has not received any messages. (See Toll Saver on page 77.) This
applies to both lines.
Note: The number of rings setting (page 99) does not apply to TAD mode.
appears in the display (this selects TAD mode).
RESOLUTION/
RECEPTION MODE
Toll Saver
No received messages
NOTHING
4 Rings
Operating the Answering System
JAN-02 10:30
Received messages
Hello!
2 Rings
) if a
65