Line Settings - Sharp UX-CD600 Operation Manual

Line Settings

Setting the dial mode
The machine is set for tone dialing. If you are on a pulse dial line, you must set
the machine for pulse dialing. Press the panel keys as explained below.
♦
If you have connected two lines, the dial mode must be set separately for
line1 and line 2.
1
FUNCTION
Press
2
Press once.
3
To set the dial mode for line 1, press
twice. To set the dial mode for line
2, press
4
Press once.
5
Select the dial mode:
TONE:
6
The display briefly shows your selection and then the next option
setting. Press
Entering tone signals during a call on a pulse dial line
If you are on a pulse dial line and need to enter tone signals during a call,
press . After this, pressing the number keys will send tone signals. When
you hang up, the machine will return to pulse dialing.
once and once.
3 times.
PULSE:
STOP
to exit the option settings.
Display:
OPTION SETTING
DIAL MODE (L1)
DIAL MODE (L2)
Example:
DIAL MODE (LINE1)
1=TONE, 2=PULSE
DIAL MODE (L1)
Line Settings
or
35