Using The Intercom Feature - Sharp UX-CD600 Operation Manual

Using the Intercom Feature

♦
When using the Intercom feature, you will not hear your voice through the
handset receiver when you speak.
♦
It may not be possible to page another cordless handset or the machine
when other cordless handsets or the machine are already in use.
♦
When two cordless handsets are used for Intercom conversation, the
cordless handsets must be within the talking range of the machine and the
machine must be powered on.
Note: If a call comes in on line 2 while a cordless handset is paging the
machine, neither the machine nor the cordless handsets will ring.
Paging the machine from a cordless handset
1
INTER
Press on the cordless handset.
COM
The numbers and names of the other cordless
handsets appear (even the numbers of cordless
handsets that are not registered)
2
Press 0 on the cordless handset to
select the machine.
3
The machine rings.
4
The other person picks up the machine handset to answer.
5
Talk with the other person. When you are ready to end the conversation,
press .
OFF
OFF
Using the Intercom Feature
You can use the
machine and cordless
handsets as an
intercom system.
Number and name
of calling handset
Cordless handset
display example:
INTERCOM:▲▼
2: BILL
3: SUE
Cordless handset display:
INTERCOM
0: BASE STATION
Machine display:
INTERCOM
1: BOB
53