Sharp UX-CD600 Operation Manual page 60

Transferring Calls and Making Conference Calls
Changing the reception mode on the machine
Note: If a call comes in on line 2 while a cordless handset is being used to
change the reception mode, neither the machine nor the cordless handsets
will ring.
REMOTE
1
/FLASH
Press
5
2
JKL
Press
RECEPTION
mode appears in the display.
REMOTE
3
/FLASH
Press
Locking the cordless handset
You can lock the cordless handset to prevent accidental operation. Hold down
on the cordless handset until "LOCK" appears in the display next to the
START
cordless handset name. When this is done, pressing the keys on the cordless
handset will have no effect. To unlock the cordless handset, hold down
again until "LOCK" no longer appears.
♦
If a call comes in while the cordless handset is locked, the cordless handset
will ring normally. Hold down
then speak with the other party. (It is not necessary to press another key to
answer after unlocking the cordless handset.)
58
.
until the desired reception
or to exit REMOTE MODE.
OFF
OFF
until the cordless handset unlocks and
START
Cordless handset display:
REMOTE MODE
Example: TEL mode
RECEPTION
TEL
START