Sharp UX-CD600 Operation Manual page 12

INTERCOM/CONFERENCE key
15
Press this key to page or locate a cordless handset (page 55). During a phone
call, press the key to transfer the call to a cordless handset or begin a
conference call (page 57).
Left and right arrow keys
16
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers (page 91), the "REVIEW
CALLS" list (only available if you have Caller ID) (page 111), and the last
number dialed (redial; page 93).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.
FUNCTION key
17
Press this key followed by the arrow keys to select special functions and
settings.
REPEAT key
18
Press this key while listening to a message to play it again (page 66).
SKIP key
19
Press this key while listening to a message to skip to the next message (page
66).
20
DELETE key
Press this key to erase recorded messages (page 67).
Number keys
21
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
Machine display
This appears
when the
machine is
using line 1.
Note: The Line 1 or Line 2 icon
does not appear when a cordless
handset is using Line 1 or Line 2.
10
Line1 Line2
This appears
This appears
when the
when the
machine is
reception
using line 2.
mode is set
to Auto
Attendant.
TEL
This appears This appears
when the when the
reception mode
reception
is set to TAD
mode is set
(the answering
to TEL.
system is turned
on).