Sharp UX-CD600 Operation Manual page 14

FUNCTION/PAUSE key
4
This key is used during the procedures for storing and editing auto dial
numbers (pages 48 and 51). When entering a number for automatic dialing,
press this key to insert a pause between digits.
TALK key
5
Press this key to make or answer a call (pages 42).
REVIEW (left) arrow key
6
Press the REVIEW arrow key and then the UP or DOWN arrow key to scroll
through your 30 most recent calls (only available if you have Caller ID) (page
112).
Number keys
7
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
8
PLAY NEW key
Press this key after pressing
personal box of the cordless handset (page 68).
PLAY key
9
Press this key after pressing
personal box of the cordless handset (page 68).
REPEAT key
10
Press this key while listening to a message to play it again (page 68).
INTERCOM/CONFERENCE key
11 11
Press this key to page the machine or another cordless handset (page 53), or
to transfer a call or begin a conference call (page 56).
START key
12
Press this key to start fax reception from the cordless handset (page 44), or to
complete entries when storing, editing, or deleting auto-dial numbers.
REMOTE/FLASH key
13
Press this key to change the reception mode on the machine (page 58), or to
listen to messages recorded in the general box or the cordless handset's
personal box (page 68). The key is also used to access special services from
your phone company that require subscription (contact your phone company
for details).
12
REMOTE
/FLASH
to listen to new messages recorded in the
REMOTE
/FLASH
to listen to all messages recorded in the