Receiving A Fax Using The Cordless Handset - Sharp UX-CD600 Operation Manual

Receiving a Fax Using the Cordless Handset

If calls come in on both lines simultaneously
If calls come in on both lines simultaneously, the display will alternately show
<<< RINGING >>>
<<<RINGING 2>>> to indicate that there is a call on line 2
<<< RINGING >>>
To take the call on line 1, press any key (other than
"
<<< RINGING >>>"
than ) while "
OFF
OFF
Putting a Call on Hold
To put the other party on hold during a call, press
will beep while the call is on hold. When you are ready to resume the call,
press once again. Note that placing the cordless handset in the charger
HOLD
will not break the connection while a call is on hold, and thus phone charges
may continue to apply.
Receiving a Fax Using the Cordless Handset
If you hear a fax tone after answering a call on the cordless handset, or if the
other party speaks to you and then wants to send a fax, press
signals the machine to begin fax reception.
Using Auto Attendant Mode
44
to indicate that there is a call on line 1, and
appears. To take the call on line 2, press any key (other
<<<RINGING 2>>>" appears
START
.
<<<RINGING 2>>>
OFF
OFF
.
. The cordless handset
HOLD
Press to begin
fax reception
) while
. This
START