Dual Page Scan - Sharp AR-M237 Copier Manual

FAXING A DIVIDED ORIGINAL

(DUAL PAGE SCAN)

When faxing a book or other bound document, you can use this function to divide the two open pages of the book
into two separate fax pages.
This function can only be used when the original is scanned using the document glass.
The original on the right side of the document glass is scanned first as page 1, and then the original on the left side
as page 2.
Dual page scan is only possible when the original size is 11" x 17" or 8-1/2" x 11R".
Book or sheet original
When page division is set,
Selecting Dual Page Scan
Follow the steps below to select Dual Page Scan and then perform the transmission operation.
1
Touch the [SPECIAL MODES] key in
fax mode and then touch the [DUAL
PAGE SCAN] key.
SUB ADDRESS
SPECIAL MODES ADDRESS REVIEW
DIRECT TX MEMORY TX
POLLING
DUAL PAGE
PROGRAM
SCAN
2
Touch the [OK] key.
OK
1/2
SCAN MODE
40
Your machine
the original is divided
into two pages when
scanned into memory
If the address book
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen. (p.7)
You will return to the
main screen and the dual
page scan icon will
appear.
Transmission to
other machine
[Example]
Scanned original size
3
Place the original on the document
glass (p.10), and perform the
transmission operation.
If you have more originals to scan after pressing
the [START] key (
original, change originals and repeat scanning
until all originals have been scanned. When
finished, touch the [READ-END] key in the touch
panel. ("Using the document glass" (p.13))
Note
The other machine
Printed out as
two separate pages
Transmitted document
11" x 17" Two 8½" x 11" pages
) and scanning the first
To cancel Dual Page Scan...
Press the [CLEAR ALL] key ( ).