Connecting The Telephone Line Cord; Power Switch; Lithium Battery - Sharp AR-M237 Copier Manual

TO USE THIS PRODUCT
CORRECTLY AS A FACSIMILE
Several points must be kept in mind when using this product as a facsimile.
Please note the following:

Connecting the telephone line cord

Use only the provided telephone line cord to connect the
machine to the wall telephone jack. As shown in the illustration,
connect the end of the cord that has the core to the LINE jack
on the side of the machine. Connect the other end (without the
core) to the wall jack.

Power switch

Keep the machine's power switch turned on at all times.
Faxes cannot be received if the power is turned off.

Lithium battery

A lithium battery inside the unit keeps settings and programmed information in memory.
• When the battery dies, settings and programmed information will be lost. Be sure to keep a written record of the
settings and programmed information. ("PRINTING PROGRAMMED INFORMATION" (p.79))
• Battery power is consumed when the machine's power switch is turned off. (Power is consumed even if no settings
or information are stored in the machine.) When the machine's power switch is turned on, almost no battery power
is consumed.
• The life of the lithium battery is approximately 5 years if the power switch are kept continually off.
• In the unlikely event that the battery expires, a message will appear in the display and the unit will not operate
correctly. If this should occurr please contact your Authorized Sharp Dealer or Service Center.
Other information
• If a thunderstorm occurs, we recommend that you unplug the power cord from the power outlet. Information will be
retained in memory even if the power cord is unplugged.
TEL jack
Insert the plug firmly until
you hear a "click".
ON
3