General Procedure For Custom Settings - Sharp AR-M237 Copier Manual

USER SETTINGS

GENERAL PROCEDURE FOR CUSTOM SETTINGS

1
Press the [CUSTOM SETTINGS] key.
LINE
DATA
B STATUS CUSTOM SETTINGS
2
Touch the key of the desired setting.
The setting screen will appear.
Each of the custom settings is explained on the
following pages.
The [TRAY SETTINGS] key is selected in the
following example.
CUSTOM SETTINGS
DISPLAY
TOTAL COUNT
CONTRAST
ADDRESS
TRAY SETTINGS
CONTROL
KEYBOARD
KEY OPERATOR PROGRAMS
SELECT
When the [TRAY SETTINGS] key is selected, the
following screen appears.
CUSTOM SETTINGS
TRAY SETTINGS
TYPE / SIZE
TRAY 1 PLAIN / 8½x11
TRAY 2 PLAIN / 8½x14
PLAIN / 11x17
TRAY 3
• When a checkbox appears next to an item
Note
in a screen, touch the checkbox (
select the item. A checkmark (
appear to indicate that the item is
selected.
In the above settings, tray 1 can be used
for printer, copy, and fax mode. Tray 2
and tray 3 can only be used for copy
mode.
• For a detailed explanation of the trays,
see "CHANGING A TRAY'S PAPER
TYPE AND PAPER SIZE SETTINGS"
(p.19).
52
EXIT
LIST PRINT CLOCK
FAX DATA
RECEIVE MODE
FORWARD
OK
COPY PRINT FAX
1/3
) to
) will
3
Touch the [OK] key in the setting
screen to close it.
4
When you are ready to exit the custom
settings, touch the [EXIT] key.
CUSTOM SETTINGS
DISPLAY
TOTAL COUNT
CONTRAST
ADDRESS
TRAY SETTINGS
CONTROL
KEYBOARD
KEY OPERATOR PROGRAMS
SELECT
EXIT
LIST PRINT CLOCK
FAX DATA
RECEIVE MODE
FORWARD