Reception Problems - Sharp AR-M237 Copier Manual

Reception problems

Problem
Reception does not take
place at the specified time.
Printing does not take place
after reception.
A received image prints out
blank.
The received image is faint.
The received image is
distorted.
A ringing sound is not made.
Cause and solution
The machine's clock is not set to the correct time.
→ Set the clock to the correct time.
A message appears in the display instructing you to
add toner or paper.
→ Restore printing capability as instructed by the display
message. Printing will begin.
A paper tray is not selected for fax mode in the
paper tray settings.
→ Select a paper tray for fax mode in the paper tray settings
in the user settings.
The wrong side of the original was scanned in the
transmitting machine.
→ Check with the operator of the transmitting machine.
The original is faint.
→ Ask the other party to resend the document using a
suitable exposure setting.
The line conditions were poor due to thunder or
other reason.
→ Ask the other party to send the document again.
The ringer volume has been turned off.
→ Set the ringer volume to low, medium, or high.
TROUBLESHOOTING
Page
operation manual for
copier
86
operation manual for
copier
-
-
-
98
7
89