Dual Page Scan - Sharp AR-M162 Operation Manual

FAXING A DIVIDED ORIGINAL
When faxing a book or other bound document, you can use this function to divide the two open pages of the book
into two separate fax pages.
This function can only be used when the original is A3, B4, or A4R size (11" x 17" or 8-1/2" x 11"R size if the
machine uses inch-based paper sizes) is scanned using the document glass.
Your machine
Book or sheet original
When dual page scan is set,
Selecting Dual Page Scan
Follow the steps below and then send the fax.
1
Make sure that the machine is in fax
mode
SCAN
When the machine is in fax
mode, the FAX indicator is lit. If
LINE DATA
COPY EXP
the light is not on, press the
FAX
SCAN COLO [FAX] key.
FAX PR
2
Press the [SPECIAL FUNCTION] key.
When the [SPECIAL
2-SIDED
FUNCTION] key is pressed, the
COPY
SPECIAL FUNCTION
special function menu appears.
DUPLEX SCAN
ACC.
3
Select "DUAL PAGES" with the [ ] or
[ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
Transmission to
other machine
the original is divided
into two pages when
scanned into memory
SPECIAL FUNCTION
SENDING OPTIONS
SENDING MENU
DUAL PAGES
[OK]:OFF ON

(DUAL PAGE SCAN)

The other machine
[Example]
Scanned original size Transmitted document
A3
A4R
Inch-based machine
Scanned original size Transmitted document
11" x 17" Two 8-1/2" x 11" pages
8-1/2" x 11"R Two 5-1/2" x 8-1/2" pages
Dual Page Scan is selected when a checkmark
appears in the "DUAL PAGES" checkbox. To cancel
the selection when a checkmark appears, press the
[OK] key in the next step so that a checkmark does not
appear.
4
Press the [OK] key.
BACK OK
GHI
5
Place the original on the document
glass (page 13) and perform the
transmission operation.
If you have more originals to scan after pressing the
[START] key ( ) and scanning the first original,
change originals and press the [START] key (
Repeat until all originals have been scanned. Press
the key. (See steps 6 to 8 of "Using the document
glass" on page 19.)
Printed out as
two separate pages
Two A4 pages
Two A5 pages
).
43
3