Setting Up A Timer Transmission - Sharp AR-M237 Copier Manual

AUTOMATIC TRANSMISSION AT A
SPECIFIED TIME (TIMER TRANSMISSION)
This feature enables you to set up a transmission or polling operation to be performed automatically at a specified
time. The time can be specified up to a week in advance. This allows you to take advantage of off-peak phone rates
without having to be there when the transmission is performed. A combined total of 50 timer transmission and
memory transmission jobs can be stored.
• After a timer transmission is performed, the information (resolution setting, destination, etc.) is automatically
Note
cleared from memory.
• To perform a timer transmission, the document must be scanned into memory. It is not possible to place the
document in the RSPF or on the document glass and have it scanned at the specified time of transmission.
• To set the date and time in the machine, refer to "CUSTOM SETTINGS" of operation manual for copier. You
can check the machine's current time in the screens of steps 3 and 4.
• Only one polling timer operation can be set up at a time. If you wish to set up multiple timer polling operations,
combine the machines to be polled into a serial polling operation with a timer setting. (p.32)

SETTING UP A TIMER TRANSMISSION

1
In fax mode, touch the [SPECIAL
MODES] key.
AUTO RECEPTION
SUB ADD
SPECIAL MODES ADDRESS
DIRECT TX MEMOR
2
Touch the [TIMER] key.
SPECIAL MODES
TIMER
3
Select the day of the week. (Touch the
key or the
day is selected.)
DAY OF THE WEEK
30
If the address book
BO
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen. (p.7)
The timer transmission
screen appears.
key until the desired
The initial factory setting
is "---" (no selection). If
you select this setting,
the transmission will be
performed as soon as the
specified time arrives.
4
Select the time. (Touch the
the key until the desired time
appears.)
CANCEL
TIME
01 30
HH. mm.
The current time appears at the top of the screen. If
the current time is not correct, press the [CLEAR ALL]
key ( ) to cancel the operation. Correct the date and
time setting as explained in "CUSTOM SETTINGS" in
operation manual for copier.
5
Touch the outer [OK] key.
OK
9:43 AM
CANCEL OK
30
mm.
key or
Select the time in
12-hour format.
If you continue touching
the keys, the
numbers will change
quickly. Touch the [AM]
or [PM] key to select AM
or PM.
You will return to the
screen in step 1. A timer
icon will appear in the
touch panel.
To cancel the timer
transmission, touch the
[CANCEL] key.