Operation Panel - Sharp AR-M237 Copier Manual

BEFORE USING THE MACHINE

OPERATION PANEL

Touch panel
1
The machine status, messages and touch keys are
displayed on the panel. The display will show the
status of printing, copying or network scanning
according to the mode that is selected. For details
see the next page.
Mode select keys and indicators
2
Use to change modes and the corresponding
display on the touch panel.
[COPY] key
Press to select copy mode.
[PRINT] key/ONLINE indicator/
DATA indicator
Press to select print mode.
• ONLINE indicator
Print jobs can be received when this indicator is lit.
• DATA indicator
A print job is in memory. The indicator lights
steadily while the job is held in memory, and
blinks while the job is printed.
[SCAN] key/DATA indicator (When the
network scanner option is installed.)
Press to select network scan mode when the
network scanner option is installed.
• DATA indicator
Lights steadily or blinks while a scanned image
is being sent.
(See "Operation manual (for network
scanner)".)
[FAX] key/LINE indicator/DATA indicator
(When the fax option is installed.)
Press to select fax mode when the fax option is
installed.
• LINE indicator
this lights up while faxes are being sent or
received.
• DATA indicator
Blinks when a fax has been received to
memory and lights steadily when a fax is
waiting in memory for transmission.
(See operation manual for facsimile.)
10
1
COPY
ON LINE
PRINT
DATA
SCAN
DATA
LINE
FAX
DATA
JOB STATUS CUSTOM SETTINGS
ACC.#-C
2 3 4 5
[JOB STATUS] key
3
Press to display the current job status. (p.12)
[CUSTOM SETTINGS] key
4
Use to adjust various settings of the machine
including the contrast of the touch panel and key
operator programs. (p.52)
Numeric keys
5
Use to enter numeric values for various settings.
[ACC.#-C] key (
6
When auditing mode is enabled, press this key
after finishing a job to return the machine to
account number entry standby.
[#/P] key (
7
Use this key to execute a job program in copy
mode.
The key is also used to dial in fax mode.
[CLEAR] key (
8
Press to clear a copy number setting or cancel a
job.
[START] key (
9
Press in copy mode, scanner mode, or fax mode to
begin copying, network scanning, or faxing.
This key blinks when auto power shut mode has
activated. Press the key to return to normal
operation.
[INTERRUPT] key (
10
Use to perform an interrupt copy job. (p.34)
[CLEAR ALL] key (
11
Resets the settings to the initial settings.
6 7 8 9 10
)
)
)
)
)
)
11