Manually Setting The Scanning Size - Sharp AR-M237 Copier Manual

MANUALLY SETTING THE
SCANNING SIZE
If you load an original that is not a standard size (such as an AB size), or if the size is not detected correctly, you
must touch the [ORIGINAL] key and set the original size manually. Perform the following steps after placing the
document in the RSPF or on the document glass.
*Standard sizes:
Note
Original sizes that can be correctly detected are 5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 14", and 11" x 17". However, 5-1/2" x 8-1/2"R can only be automatically detected when the RSPF is
used.
If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, or
the original size may not appear.
1
Touch the [ORIGINAL] key.
STANDARD
RESOLUTION
AUTO 8½x11R
ORIGINAL
2
Touch the [MANUAL] key.
ORIGINAL SIZE
MANUAL
DED 2-SIDED
LET TABLET
3
Touch the desired original size key.
SPEAKER REDIAL
ORIGINAL SIZE
AUTO MANUAL
5 x8 1 / 1 / 5 x8 R 1 / 1 / 8 x11 1 /
2 2 2 2 2
1 / 1 /
8 x11R 8 x14 11x17
2 2
INCH
20
If the address directory
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen. (p.7)
The sizes that can be
selected are displayed.
The [AUTO] key is no
longer highlighted. The
OK
[MANUAL] key and the
selected original size key
OK
are highlighted.
AB
If you wish to select an AB size, touch the
[AB INCH] key and then touch the desired
original size key.
SPEAKER REDIAL
ORIGINAL SIZE
AUTO MANUAL
A4 A4R B5
B5R A4 A4R
B4 A3
4
Touch the outer [OK] key.
SIZE OK
MANUAL 1 /
8 x11R
2
OK
1 / 1 /
R 8 x11
2 2
13 11x17 AB
INCH
5
The selected size appears in the top
half of the [ORIGINAL] key.
EXPOSURE
STANDARD
RESOLUTION
1 /
8 x11R
2
ORIGINAL
"AB" is highlighted and
AB size keys are
displayed. To return to
OK
the inch palette, touch
OK
the [AB INCH] key
AB
once again.
INCH
You will return to the
initial screen. (Pressing
the inner [OK] key in the
step above returns you to
step 2.)