Table of Contents
Advertisement
c O M b I H O O d p L u S ™ v e N T L e S S H O O d O p T I O N
FRONT OF HOOD
ALIGNS WITH FRONT
OF COMBI DOOR
COMBITHERM CT PROFORMANCE AND CT CLASSIC SERIES • INSTALLATION MANUAL • MN-35947 • 53.
INSTALLATION
The CombiHood PLUS option is factory installed directly
on the top of the Alto-Shaam Combitherm CTP or CTC
series oven.
Using EPA method 202 testing, grease laden vapors
•
emitted by the Combi Ventless hood are 0.58 mg/m
less than U.L.'s established standard of 5 mg/m
Alto-Shaam's factory installed Ventless Hood is placed
•
directly on the top of a Combitherm oven.
A high-power fan captures all steam and fumes from the
•
oven cavity into the hood intake and out the back surface
exhaust vent, trapping grease as the air moves through
the filter system.
As fumes and vapors are circulated through the hood,
•
condensed steam drains from a drain at the rear of the
hood.
An activated charcoal filter cleans the air before venting it
•
out the top of the hood.
CombihoodPLUS™ performance is "smart"; engaging
•
the fan during the last minute of the cook mode which
provides quiet operation and consumes less power.
CONDENSATE DRAIN
A ventless hood condensate drain line to
the floor drain must be installed. The 1/2"
barbed connection is found at the back
of the hood. The drain line must always
be a positive gradient away from the
Combitherm oven.
Test the drain for proper drainage and
signs of leaking on a monthly basis.
– far
3
.
3
Advertisement
Table of Contents
