Dascom DC-3300 User Manual page 40

Lift the cover open lever to open
（1）
the top cover.
Place the ribbon vertically into
（2）
the ribbon cartridge slot (the new
ribbon spindle into the front ribbon
cartridge slot, and the empty ribbon
spindle into the rear ribbon cartridge
slot). Tighten the ribbon, and close the
top cover to its original position.
When the ribbon roller is mounted to the cartridge base, push it
（ 1 ）
down to the bottom with a little force.
After installation, the ribbon film should be slightly tightened,
（ 2 ）
without any no skew.
DC-3300
26
User Manual v1.0