Introduction - AEMC 6505 User Manual

Thank you for purchasing an AEMC
For best results from your instrument and for your safety, read the enclosed
operating instructions carefully and comply with the precautions for use. Only
qualified and trained operators should use this product.
Symbols and Definitions
Signifies that the instrument is protected by double or reinforced insulation
CAUTION - Risk of Danger! Indicates a WARNING. Whenever this symbol
is present, the operator must refer to the user manual before operation
Indicates a risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous
Battery
Fuse
USB socket
Indicates Important information to acknowledge
This product complies with the Low Voltage & Electromagnetic Compatibility
European directives (73/23/CEE & 89/336/CEE)
The UKCA marking certifies that the product is compliant with the
requirements that apply in the United Kingdom, specifically regarding
Low-Voltage Safety, Electromagnetic Compatibility, and the Restriction of
Hazardous Substances
In the European Union, this product is subject to a separate collection
system for recycling electrical and electronic components in accordance with
directive WEEE 2002/96/EC
Definition of Measurement Categories (CAT)
CAT IV: Corresponds to measurements performed at the primary electrical
supply (< 1000 V).
Example: primary overcurrent protection devices, ripple control units,
and meters.
CAT III: Corresponds to measurements performed in the building installation
at the distribution level.
Example: hardwired equipment in fixed installation and circuit
breakers.
CAT II: Corresponds to measurements performed on circuits directly
connected to the electrical distribution system.
Example: measurements on household appliances and portable tools.
6

1. INTRODUCTION

Instruments Megohmmeter Model 6505.
®
Megohmmeter Model 6505 - User Manual