Introduction - AEMC SL261 User Manual

The safety warnings are provided to ensure the safety of
personnel and proper operation of the instrument. Read the
instruction completely.
• Use caution on any circuit: potentially high voltages and currents
• Do not use the probe if damaged. Always connect the current
• Do not use on non insulated conductor with a potential to ground
• Before each use, inspect the probe; look for cracks in housing or
•
• Do not use the probe anywhere beyond the tactile barrier.
2
Shop for Power Metering products online at:

INTRODUCTION

may be present and may pose a shock hazard.
probe to the measuring device before it is connected around the
conductor
greater than 600V CAT III pollution 2. Use extreme caution when
clamping around bare conductors or bus bars.
output cable insulation.
Do not use clamp in wet environment or in locations that hazardous
gases exist.
www.
CHAPTER 1
WARNING
AC/DC Current Oscilloscope Probe Model SL261
PowerMeterStore
1.888.610.7664
.com