Configuration Procedure - HP FlexNetwork MSR Series Configuration Manuals

Figure 34 Network diagram
PE 1
Loop0
GE1/0/2
CE 1
AS 65410
Table 13 Interfaces and IP address assignment
Device
CE 1
PE 1
P

Configuration procedure

1. Configure PE 1:
# Configure four classes to match MPLS packets with DSCP values AF11, AF21, AF31, and EF
in the same VPN.
<PE1> system-view
[PE1] traffic classifier af11
[PE1-classifier-af11] if-match dscp af11
[PE1-classifier-af11] quit
[PE1] traffic classifier af21
[PE1-classifier-af21] if-match dscp af21
[PE1-classifier-af21] quit
[PE1] traffic classifier af31
[PE1-classifier-af31] if-match dscp af31
[PE1-classifier-af31] quit
[PE1] traffic classifier efclass
[PE1-classifier-efclass] if-match dscp ef
[PE1-classifier-efclass] quit
# Configure four traffic behaviors to set the EXP values to 1, 2, 3, and 4 for MPLS packets.
[PE1] traffic behavior exp1
[PE1-behavior-exp1] remark mpls-exp 1
[PE1-behavior-exp1] quit
[PE1] traffic behavior exp2
P
GE1/0/1 GE1/0/2
2M 2M
GE1/0/1 GE1/0/1
AS 100
100M 100M
GE1/0/1
GE1/0/1
VPN 1 VPN 1
AS 65420
Interface IP address
GE1/0/1 10.1.1.2/24
GE1/0/2 10.1.1.1/24
GE1/0/1 12.1.1.1/24
Loop0 1.1.1.1/32
GE1/0/1 12.1.1.2/24
GE1/0/2 12.2.1.2/24
PE 2
Loop0
GE1/0/2
CE 2
Device
CE 2
PE 2
121
Interface IP address
GE1/0/1 10.2.1.2/24
GE1/0/2 10.2.1.1/24
GE1/0/1 12.2.1.1/24
Loop0 1.1.1.2/32