Applying The Qos Policy To An Interface Or Pvc; Applying The Qos Policy To A Pw - HP FlexNetwork MSR Series Configuration Manuals

•
PW—The QoS policy takes effect on the traffic of a PW. For information about PWs, see MPLS
Configuration Guide.
•
Control plane—The QoS policy takes effect on the traffic received on the control plane.
•
Management interface control plane—The QoS policy takes effect on the traffic sent from the
management interface to the control plane.
You can modify traffic classes, traffic behaviors, and class-behavior associations in a QoS policy
even after it is applied (except that it is applied to a user profile). If a traffic class uses an ACL for
traffic classification, you can delete or modify the ACL.

Applying the QoS policy to an interface or PVC

A QoS policy can be applied to multiple interfaces or PVCs. However, only one QoS policy can be
applied to one direction (inbound or outbound) of an interface or PVC.
The QoS policy applied to the outgoing traffic on an interface or PVC does not regulate local packets.
Local packets refer to critical protocol packets sent by the local system for operation maintenance.
The most common local packets include link maintenance, routing, LDP, RSVP, and SSH packets.
To apply a QoS policy to an interface or PVC:
Step
1. Enter system view.
2. Enter interface or PVC
view.
3. Apply the QoS policy to
the interface or PVC.

Applying the QoS policy to a PW

You can apply a QoS policy to one or more PWs only in the outbound direction.
To apply a QoS policy to a PW:
Step
1. Enter system view.
Command
system-view
•
Enter interface
interface
interface-number
•
Enter PVC view:
a. interface atm interface-number
b. pvc vpi/vci
qos apply policy policy-name { inbound |
outbound }
Command
system-view
30
Remarks
N/A
view:
interface-type
Settings in interface view
take effect on the current
interface.
view take effect on the
current PVC.
By default, no QoS policy is
applied to an interface or
PVC.
Remarks
N/A
Settings in PVC