Displaying And Maintaining Qos Policies - HP FlexNetwork MSR Series Configuration Manuals

Step
1. Enter system view.
2. Enter interface view.
3. Set the
statistics
period for the interface.

Displaying and maintaining QoS policies

Execute display commands in any view and reset commands in user view.
Task
Display traffic
(centralized
mode).
Display traffic
(distributed
mode/centralized devices in IRF mode).
Display traffic
(distributed devices in IRF mode).
Display traffic behavior configuration
(centralized
mode).
Display traffic behavior configuration
(distributed
mode/centralized devices in IRF mode).
Display traffic behavior configuration
(distributed devices in IRF mode).
Display QoS
(centralized
mode).
Display QoS
(distributed
mode/centralized devices in IRF mode).
Display QoS
(distributed devices in IRF mode).
Display information about QoS policies
applied to
devices in standalone mode).
Command
system-view
interface
interface-number
traffic rate
collection
qos flow-interval interval
class configuration
devices in standalone
class configuration
devices in standalone
class configuration
devices in standalone
devices in standalone
policy configuration
devices in standalone
policy configuration
devices in standalone
policy configuration
interfaces (centralized
interface-type
Command
display traffic classifier { system-defined | user-defined }
[ classifier-name ]
display traffic classifier { system-defined | user-defined }
[ classifier-name ] [ slot slot-number ]
display traffic classifier { system-defined | user-defined }
[ classifier-name ] [ chassis chassis-number slot slot-number ]
display traffic behavior { system-defined | user-defined }
[ behavior-name ]
display traffic behavior { system-defined | user-defined }
[ behavior-name ] [ slot slot-number ]
display traffic behavior { system-defined | user-defined }
[ behavior-name ] [ chassis chassis-number slot slot-number ]
display qos policy { system-defined | user-defined }
[ policy-name [ classifier classifier-name ] ]
display qos policy { system-defined | user-defined }
[ policy-name [ classifier classifier-name ] ] [ slot slot-number ]
display qos policy { system-defined | user-defined }
[ policy-name [ classifier classifier-name ] ] [ chassis
chassis-number slot slot-number ]
display qos policy interface [ interface-type interface-number
[ pvc { pvc-name | vpi/vci } ] ] [ inbound | outbound ]
34
Remarks
N/A
N/A
The default setting
minutes.
A subinterface uses
statistics collection
configured on the
interface.
A PVC uses the statistics
collection period configured on
the ATM main interface.
is 5
the
period
main