Configuring Gts By Using The Non-Mqc Approach - HP FlexNetwork MSR Series Configuration Manuals

Step
3. Configure
criterion.
4. Return to system view.
5. Create
behavior
traffic behavior view.
6. Configure
action.
7. Return to system view.
8. Create a QoS policy
and enter QoS policy
view.
9. Associate the class
with
behavior in the QoS
policy.
10. Return to system view.
11. Apply the QoS policy.

Configuring GTS by using the non-MQC approach

You can configure the following types of GTS when using the non-MQC approach:
•
ACL-based GTS—Configures GTS parameters for traffic matching an ACL. By specifying
multiple ACLs, you can set GTS parameters for traffic of different traffic classes.
•
GTS for all traffic—Configures GTS parameters for all traffic.
Configuring ACL-based GTS
Step
1. Enter system view.
2. Enter interface view.
Command
a match
if-match [ not ] match-criteria
quit
a traffic
and enter
traffic behavior behavior-name
•
In
gts
[ cbs committed-burst-size [ ebs
excess-burst-size ] ] [ queue-length
a GTS
queue-length ]
•
In
gts percent cir cir-percent [ cbs
cbs-time
[ queue-length queue-length ]
quit
qos policy policy-name
the traffic
classifier
behavior-name
quit
•
Applying the QoS policy to an interface
or PVC
•
Applying the QoS policy to a control
plane
Command
system-view
interface
interface-number
absolute
cir committed-information-rate
percentage:
[ ebs ebs-time
classifier-name behavior
interface-type
52
Remarks
By default, no match criterion
is configured.
For configurable
criteria, see the if-match
command in ACL and QoS
Command Reference.
N/A
By default,
behaviors exist.
value:
By default, no GTS action is
configured.
] ]
N/A
By default, no QoS policies
exist.
By default, a traffic class is
not associated with a traffic
behavior.
N/A
By default, no QoS policy is
applied.
Choose one of the application
destinations as needed.
Remarks
N/A
N/A
match
no traffic