HP FlexNetwork MSR Series Configuration Manuals page 75

•
You cannot configure the queue af command together with the queue ef or queue sp
command in the same traffic behavior.
•
To configure queue af for multiple classes of a policy, you must configure them in one of the
following units:
Bandwidth.

Percentage of the available bandwidth.

Percentage of the remaining bandwidth.

•
To configure both the queue ef and queue af commands in a policy, you must configure them in
the same unit (either bandwidth or percentage). When you configure AF in percentage of the
remaining bandwidth, you can configure EF in an absolute value or percentage.
To configure AF and the minimum guaranteed bandwidth:
Step
1. Enter system view.
2. Create a traffic behavior and
enter traffic behavior view.
3. Configure
minimum
bandwidth.
Configuring EF and the maximum bandwidth
When you configure EF and the maximum bandwidth, follow these restrictions and guidelines:
•
You cannot configure the queue ef command together with the any of the following commands
in one traffic behavior:
queue af.

queue-length.

queue sp.

•
The default class cannot be associated with a traffic behavior including EF.
•
To configure queue af for multiple classes of a policy, you must configure them in one of the
following units:
Bandwidth.

Percentage of the available bandwidth.

Percentage of the remaining bandwidth.

•
To configure both the queue ef and queue af commands in a policy, you must configure them in
the same unit (either bandwidth or percentage). When you configure AF in percentage of the
remaining bandwidth, you can configure EF in an absolute value or percentage.
To configure EF and the maximum bandwidth:
Step
1. Enter system view.
2. Create a traffic behavior and
enter traffic behavior view.
3. Configure
maximum bandwidth.
Command
system-view
traffic behavior behavior-name
AF and the
queue af bandwidth { bandwidth
guaranteed
| pct percentage | remaining-pct
remaining-percentage }
Command
system-view
traffic behavior behavior-name
queue ef bandwidth { bandwidth
EF and the
[ cbs burst ] | pct percentage
[ cbs-ratio ratio ] }
73
Remarks
N/A
By default, no traffic behaviors
exist.
By default, AF is not configured.
Remarks
N/A
By default, no traffic behaviors
exist.
By default, EF is not configured.