HP FlexNetwork MSR Series Configuration Manuals page 51

Step
3. Configure a match
criterion.
4. Return to system
view.
5. Create a traffic
behavior and enter
traffic behavior view.
6. Configure a traffic
policing action.
7. Return to system
view.
8. Create a QoS policy
and enter QoS policy
view.
9. Associate the traffic
class with the traffic
behavior in the QoS
policy.
10. Return to system
view.
11. Apply the QoS policy.
Command
if-match [ not ] match-criteria
quit
traffic behavior behavior-name
•
In absolute
car
committed-information-rate [ cbs
committed-burst-size
excess-burst-size ] ] [ green
action | red action | yellow
action ]
car
committed-information-rate [ cbs
committed-burst-size
peak-information-rate
excess-burst-size
action | red action | yellow
action ] *
•
In
car cir percent cir-percent [ cbs
cbs-time [ ebs ebs-time ] ]
[ green action | red action |
yellow action
car cir percent cir-percent [ cbs
cbs-time ] pir
pir-percent [ ebs ebs-time ]
[ green action | red action |
yellow action ] *
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit
•
Applying the QoS policy to an
interface or PVC
•
Applying the QoS policy to a
control plane
•
Applying the QoS policy to the
management interface control
plane
49
Remarks
By default, no match criterion is
configured.
For more information about the
if-match command, see ACL and
QoS Command Reference.
N/A
By default, no traffic behaviors exist.
value:
cir
[ ebs
*
cir
] pir
[ ebs
] [ green
By default, no traffic policing action is
configured.
percentage:
] *
percent
N/A
By default, no QoS policies exist.
By default, a traffic class is not
associated with a traffic behavior.
N/A
Choose
destinations as needed.
By default, no QoS policy is applied.
one of the application