Show Fips-Mode - Cisco Firepower 4100 Command Reference Manual

show fips-mode

show fips-mode
To display current FIPS (Federal Information Processing Standard) mode status information, use the show
fips-mode command.
show fips-mode
Syntax Description
This command has no arguments or keywords.
Security mode
Command Modes
Command History
Release
1.1(1)
Enabling certification compliance on a Firepower 4100/9300 chassis does not automatically propagate
Usage Guidelines
compliance to any of its attached logical devices.
Example
This example shows how to enter security mode and display current FIPS mode status information:
FP9300-A # scope security
FP9300-A /security # show fips-mode
FIPS Mode Admin State: Disabled
FIPS Mode Operational State: Disabled
FP9300-A /security #
Related Commands
Command
disable fips-mode
enable fips-mode
Cisco Firepower 4100/9300 FXOS Command Reference
270
Modification
Command added.
Description
Disables FIPS mode.
Enables FIPS mode.
S Commands