Show Ssh-Server - Cisco Firepower 4100 Command Reference Manual

S Commands

show ssh-server

To display information about the SSH server, use the show ssh-server command.
show server [host-key]
Syntax Description
host-key
Services mode
Command Modes
Command History
Release
1.1(1)
Use this command to view SSH connection and authentication information.
Usage Guidelines
Example
This example shows how to display SSH server information:
FP9300-A # scope system
FP9300-A /system # scope services
FP9300-A /system/services # show ssh-server
Name: ssh
aes128-ctr,aes192-ctr,aes256-ctr,3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc
FP9300-A /system/services #
Command
create ssh-server
delete ssh-server
set ssh-server
(Optional) Displays SSH server host key size, and whether the key has been
deleted.
Modification
Command added.
Admin State: Enabled
Port: 22
Kex algorithm: diffie-hellman-group14-sha1
Mac algorithm: hmac-sha1,hmac-sha2-256,hmac-sha2-512
Encrypt algorithm:
Authentication algorithm: Rsa
Host Key Size: 2048
Rekey Limit Volume: None Time: None
Description
Creates a new SSH server host key.
Deletes the existing SSH server host key.
Sets the SSH host key size.
Cisco Firepower 4100/9300 FXOS Command Reference
show ssh-server
357