Show Server Actual-Boot-Order - Cisco Firepower 4100 Command Reference Manual

show server actual-boot-order

show server actual-boot-order
To display the server boot order actually used by the BIOS when the server last booted, use the show server
actual-boot-order command.
show server actual-boot-order [server_id|uuid dynamic_uuid]
Syntax Description
server_id
uuid dynamic_uuid
Any command mode
Command Modes
Command History
Release
1.1(1)
By default, this command displays actual boot order information for all servers.
Usage Guidelines
Example
This example shows how to display the actual boot order of all servers:
firepower# show server actual-boot-order
Server 1/1:
resence of UEFI loader on device
Server 1/2:
resence of UEFI loader on device
firepower#
Related Commands
Command
show server boot-order
Cisco Firepower 4100/9300 FXOS Command Reference
326
(Optional) Displays the actual boot order for a specific server, expressed as
chassis-number/server-number (rack ID is not a valid option).
(Optional) Displays the actual boot order for a server specified using its dynamic
universally unique identifier (UUID); specifed in the form
NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN
Modification
Command added.
Last Update: 2017-07-19T17:43:14.982
LocalStorageAny
(1) Not found. Please verify presence of device and p
Last Update: 2017-07-19T17:43:14.980
LocalStorageAny
(1) Not found. Please verify presence of device and p
Description
Shows server boot order.
S Commands
.