Show Server Boot-Order - Cisco Firepower 4100 Command Reference Manual

show server boot-order

show server boot-order
To display the boot order of a server, use the show server boot-order command.
show server boot-order [server_id|detail|uuid dynamic_uuid]
Syntax Description
server_id
detail
uuid dynamic_uuid
Any command mode
Command Modes
Command History
Release
1.1(1)
By default, this command displays boot order information for all servers.
Usage Guidelines
Example
This example shows how to display the boot order of all servers:
FP9300-A# show server boot-order
Boot Definition:
Cisco Firepower 4100/9300 FXOS Command Reference
332
(Optional) Displays the boot order for a specific server, expressed as
chassis-number/server-number (rack ID is not a valid option). The keyword
detail is available with this option.
(Optional) Displays detailed boot order information.
(Optional) Displays the boot order for a particular server, specified with its
dynamic universally unique identifier (UUID); entered in the form
NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN
with this option.
Modification
Command added.
Full Name: sys/chassis-1/blade-1/boot-policy
Reboot on Update: No
Boot Mode: Uefi
Boot Storage:
Order: 1
Local Storage:
Name: local-storage
Boot Any Local Device:
Order: 1
Type: Local Any
Full Name: sys/chassis-1/blade-2/boot-policy
Reboot on Update: No
Boot Mode: Uefi
Boot Storage:
Order: 1
Local Storage:
Name: local-storage
S Commands
. The keyword detail is available