A R Commands
acknowledge fault
To acknowledge a system fault, use the acknowledge fault command.
acknowledge fault id
Syntax Description
fault id
Multiple modes
Command Modes
Command History
Release
1.1(1)
Use the acknowledge fault command to acknowledge the existence of a fault.
Usage Guidelines
Example
The following example shows how to acknowledge a fault:
firepower # acknowledge fault 11347599
firepower* # commit-buffer
firepower #
Related Commands
Command
acknowledge server
acknowledge slot
show fault
The fault identification number. The range of valid values is 0 to
18446744073709551615.
Modification
Command added.
Description
Acknowledges a server on the device.
Acknowledges the existence of a slot in the device.
Shows fault policy information.
Cisco Firepower 4100/9300 FXOS Command Reference
acknowledge fault
27