Show Event - Cisco Firepower 4100 Command Reference Manual

show event

show event
To display FSM event information, use the show event command.
show event [event_id| detail]
Syntax Description
event_id
detail
Any command mode
Command Modes
Command History
Release
1.1(1)
You can use the show event command without any arguments or keywords to display a list of events.
Usage Guidelines
Example
This example shows how to display a list of events:
FP9300-A# show event
Creation Time
------------------------ -------- -------- -----------
2025-12-23T04:17:00.678
secondary(FSM-STAGE:sam:dme:PkiEpUpdateEp:SetKeyRingPeer)
2025-12-23T04:17:00.678
secondary(FSM-STAGE:sam:dme:PkiEpUpdateEp:SetKeyRingPeer)
2025-12-23T04:17:00.678
configration on primary(FSM-STAGE:sam:dme:PkiEpUpdateEp:PostSetKeyRingLocal)
2025-12-23T04:17:00.678
configration on primary(FSM-STAGE:sam:dme:PkiEpUpdateEp:PostSetKeyRingLocal)
2025-12-23T04:17:00.678
configuration on secondary(FSM-STAGE:sam:dme:PkiEpUpdateEp:PostSetKeyRingPeer)
2025-12-23T04:17:00.678
configuration on secondary(FSM-STAGE:sam:dme:PkiEpUpdateEp:PostSetKeyRingPeer)
2025-12-23T04:17:00.678
configuration(FSM:sam:dme:PkiEpUpdateEp)
2025-12-23T04:17:00.677
on primary(FSM-STAGE:sam:dme:PkiEpUpdateEp:SetKeyRingLocal)
FP9300-A#
Related Commands
Command
show sel
Cisco Firepower 4100/9300 FXOS Command Reference
262
(Optional) Displays information for a specific event.
(Optional) Displays detailed information for all events.
Modification
Command added.
ID
176144 E4195253 [FSM:STAGE:SKIP]: keyring configuration on
176145 E4195253 [FSM:STAGE:END]: keyring configuration on
176146 E4197130 [FSM:STAGE:SKIP]: post processing after keyring
176147 E4197130 [FSM:STAGE:END]: post processing after keyring
176148 E4197131 [FSM:STAGE:SKIP]: post processing after keyring
176149 E4197131 [FSM:STAGE:END]: post processing after keyring
176150 E4195525 [FSM:END]: keyring
176142 E4195252 [FSM:STAGE:STALE-SUCCESS]: keyring configuration
<--- remaining lines removed for brevity --->
Description
Shows the contents of the system event log (SEL) of a server.
Code Description
S Commands