Cisco Firepower 4100 Command Reference Manual page 280
Fully integrated next-generation firewall
Hide thumbs
Also See for Firepower 4100:
- Hardware installation manual (82 pages) ,
- Manual (42 pages) ,
- Maintenance and upgrade manual (20 pages)
Table of Contents
Advertisement
show interface
Ethernet2/8
The following is sample output from the show interface detail command.
firepower# scope eth-uplink
firepower /eth-uplink # scope fabric a
firepower /eth-uplink/fabric # show interface detail
Interface:
Port Name: Ethernet1/2
User Label:
Port Type: Data
Admin State: Enabled
Oper State: Up
State Reason:
flow control policy: default
Auto negotiation: No
Admin Speed: 1 Gbps
Oper Speed: 1 Gbps
Admin Duplex: Full Duplex
Oper Duplex: Full Duplex
Ethernet Link Profile name: default
Oper Ethernet Link Profile name: fabric/lan/eth-link-prof-default
Udld Oper State: Admin Disabled
Inline Pair Admin State: Enabled
Inline Pair Peer Port Name:
Allowed Vlan: All
Network Control Policy: default
Current Task:
Port Name: Ethernet1/4
User Label:
Port Type: Mgmt
Admin State: Enabled
Oper State: Up
State Reason:
flow control policy: default
Auto negotiation: No
Admin Speed: 1 Gbps
Oper Speed: 1 Gbps
Admin Duplex: Full Duplex
Oper Duplex: Full Duplex
Ethernet Link Profile name: default
Oper Ethernet Link Profile name: fabric/lan/eth-link-prof-default
Udld Oper State: Admin Disabled
Inline Pair Admin State: Enabled
Inline Pair Peer Port Name:
Allowed Vlan: All
Network Control Policy: default
Current Task:
[...]
The following is sample output from the show interface expand command.
firepower# scope eth-uplink
firepower /eth-uplink # scope fabric a
firepower /eth-uplink/fabric # show interface expand
Interface:
Port Name: Ethernet1/2
Cisco Firepower 4100/9300 FXOS Command Reference
278
Data
Disabled
Sfp Not Present
All
S Commands
Unknown
- Quick Links:
- Cli Overview
Hide quick links:
Advertisement
Table of Contents
