Set Con-Absolute-Session-Timeout - Cisco Firepower 4100 Command Reference Manual

S Commands

set con-absolute-session-timeout

To set the serial console absolute session timeout, use the set con-absolute-session-timeout command.
set con-absolute-session-timeout seconds
Syntax Description
seconds
Default authentication mode
Command Modes
Command History
Release
1.1(1)
You can separately configure the absolute session timeout for serial console sessions. This means you can
Usage Guidelines
disable the serial console absolute session timeout for debugging while maintaining the absolute timeout for
other forms of access.
Example
This example shows how to enter default authentication mode and then set the serial console absolute
timeout to four minutes:
FP9300-A# scope security
FP9300-A /security # scope default-auth
FP9300-A /security/default-auth # set con-absolute-session-timeout 240
FP9300-A /security/default-auth* # commit-buffer
FP9300-A /security/default-auth #
Related Commands
Command
set refresh-period
show detail
Serial console absolute session timeout; value can be 0 to 3600 seconds. To
disable this timeout, set the value to 0.
Modification
Command added.
Description
Sets the Web session refresh period.
Displays the current session and absolute session timeout settings.
Cisco Firepower 4100/9300 FXOS Command Reference
set con-absolute-session-timeout
177