Show Server Firmware - Cisco Firepower 4100 Command Reference Manual

show server firmware

show server firmware
To display server firmware versions and status information, use the show server firmware command.
show server firmware [server_id|adapter|bios|boardcontroller|cimc|detail|fxos|storage|uuid
dynamic_uuid]
Syntax Description
server_id
adapter
bios
boardcontroller
cimc
detail
fxos
storage
uuid dynamic_uuid
Any command mode
Command Modes
Command History
Release
1.1(1)
By default, this command lists basic firmware information for each server.
Usage Guidelines
Example
This example shows how to display firmware and status information for local-disk and RAID
controllers on all servers:
FP9300-A# show server firmware storage
Server 1/1:
Cisco Firepower 4100/9300 FXOS Command Reference
338
(Optional) Displays firmware and status information for a particular server,
specified by chassis-number/server-number (rack ID is not a valid option).
(Optional) Displays firmware version and status information for each adapter.
The keyword detail is also available.
(Optional) Displays server BIOS firmware versions and status. The keyword
detail is also available.
(Optional) Displays management-controller versions and status. The keyword
detail is also available.
(Optional) Displays Cisco Integrated Management Controller versions and
status. The keyword detail is also available.
(Optional) Displays detailed firmware and status information in list form.
(Optional) Displays version and status information for installed Security
Services Processors (SSPs) operating systems. The keyword detail is also
available.
(Optional) Lists version and status information for local-disk and RAID
controllers. The keyword detail is also available.
(Optional) Displays firmware and status information for a particular server,
specified using its dynamic universally unique identifier (UUID), entered in
the form
Modification
Command added.
RAID Controller 1:
NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN
S Commands
.