Scope Fabric-Interconnect - Cisco Firepower 4100 Command Reference Manual

scope fabric-interconnect

scope fabric-interconnect
To enter fabric interconnect mode, use the scope fabric-interconnect command.
scope fabric-interconnect a
Syntax Description
a
EXEC mode
Command Modes
Command History
Release
1.1(1)
Example
This example shows how to enter fabric interconnect mode:
FP9300-A# scope fabric-interconnect a
FP9300-B /fabric-interconnect #
Related Commands
Command
show fabric-interconnect
Cisco Firepower 4100/9300 FXOS Command Reference
136
Specifies Fabric A. There is only one fabric on Firepower devices.
Modification
Command added.
Description
Shows fabric interconnect information.
S Commands